How To Maintain Artificial Grass?

Remove debris regularly

In order to keep the artificial turf clean, the debris discarded by the athletes or spectators must be removed in time. It's necessary to design a fixed road in advance so that to prevent dirt particles from being brought into the lawn. Once the soil is brought into the field, it should be removed as soon as possible to prevent it from slowly accumulating in the fibers of the artificial grass.

Removal of slime in the lawn

You can wash with warm water and ordinary detergent to clean the soil on the lawn. Both a carpet brush and a cotton mop can be used. If you use detergent, it should be rinsed thoroughly with plenty of water after wiping off the soil.

The mark of the venue

As we all know, a field covered with synthetic grass can apply to many scenes. However, because of the difference in rules, the lines marked in the field are not immutable. Therefore, it becomes necessary to clean up these marking lines.

Light repair

Artificial turf requires regular inspections. It's just like natural turf. It needs at least one or two comprehensive inspections in a year to determine which areas need to be repaired in a timely and accurate manner. If the lawn is overused or used for more than 5 years, It requires a comprehensive inspection twice a year.

Prevent long-term heavy pressure from damaging the lawn

Artificial turf cannot tolerate long-term heavy treading load. For example, frequent training, rallies, open-air music evenings and acrobatic performances are often held on the lawn of the synthetic sports field, which can easily cause excessive pressure and cause damage to the lawn. In order to prevent damage to the lawn under the above-mentioned conditions, the static load pressure for a long time cannot exceed 1.2~1.4kpa. In order to prevent the danger of excessive static load pressure, plywood with a length of 1.22m×2.44m and a thickness of 19mm should be laid on the section where static load pressure may be generated, so that people and objects that generate static load pressure are placed on the plywood.

Keep the artificial turf moist

The temperature of the artificial turf will rise rapidly in hot weather conditions. If a certain amount of evaporation can be maintained, the temperature of the artificial turf can be kept close to the temperature of the natural turf. Keeping the lawn moist in this way can not only reduce the wear on the lawn, but also reduce the possibility of serious accidents. The frictional lawn can reduce the elasticity of the ball. In the water supply operation to keep the lawn moist, spray water It must be even and in an appropriate amount, so that the turf maintains sufficient humidity without allowing water to submerge the turf or form small pits on the lawn.